Home / Cellsol Equipment / ESP32 WiFi Pylon / Bill of Materials

Bill of Materials

Everything you need for the LoRa32-based WiFi Pylon

  • A Heltec Lora32 or Lora32v2 module
  • The Arduino software, available here
  • A USB cable
  • Battery holder (if needed for your battery)
  • 1.2V batteries (the bigger the better) OR, any 3.6 or 3.7 volt battery (li-ion, lipo, etc.) See Powering the Node
  • Battery connector for the Lora32 module (should come with the Lora32)
  • A solar panel to charge the battery (optional, USB may also be used for charging if the pylon is connected to mains)
  • A case for your Lora32, antenna, and battery - see our case designs